|
|
|
Super Lube Grease
Material Ssfcty Data Sheet
May be used to comply with
OSHA ' s Hazard Communication Standard
29CFR 1910.1200.Standard must be consulted
for specific requirements
|
U.S.Department of Labor
Occupational Safety and Health Administration
(Non-Mandatory Form)
Form Approved
OMB No.1218-0072 |
IDENTITY (AS USED ON Lable and List)
SUPER LUBE GREASE
Part Numbers-82340,21010,21030,21036,
41150,41160,41050,41030,41120,41140,
21013,21015,11520 |
Note:Blank spaces are not permitted.If
any item is not applicable,or no information is available,the space
must be marked to indicate that.
|
SECTION I
| Manufacturer's Name: |
SYNCO CHEMICAL
CORPORATION |
| Address: |
24 DaVINCI DRIVE
BOHEMIA,NY 11716 |
| Emergency Telephone Number: |
631-567-5300 |
| Telephone Numbe for Information: |
631-567-5300 |
| Date Prepared: |
February5,2003 |
| Signature of Preparer (Optional): |
|
SECTION II-HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
| Hazardous Components |
OSHAPEL ACGIHTLV |
Recommended Percentages |
(Specific Chemical/Identity;Common Name(s)
|
| SYNTHETIC HYDROCARBON |
CAS#68037-01-4 |
70-80% |
| HYDRO TREATED POLYMER |
CAS#8042-47-5 |
10-20% |
| ANTI-TREATED POLYMER |
CAS#41484-35-9 |
.5-2% |
| FUMED SILICA |
CAS#68611-44-9 |
7-10% |
| THERMAL STABILIZER |
CAS#68648-89-5 |
3-5% |
| POLYTETRAFLUORETHYLENE |
CAS#68648-89-5 |
.5-2% |
| POLYGLYCOL |
CAS#025322-69-4 |
1-2% |
| PROPRIETARY ADDITIVES |
|
.25-1% |
ALL INGREDIENTS ARE TSCA LISTED
SECTION III-PHYSICAL/CHEMICAL CHARACTERISTICS
| Boiling Point |
N/A |
Specific Gravity(H2O=1) |
0.87±0.02 |
| Vapor Pressure(mm Hg.) |
N/E |
Melting Point |
N/A |
| Vapor Density(AIR=1) |
N/E |
Evaporation Rate(Buty1 Acetate=1) |
N/E |
| Solubility in Water |
Not Soluble in Water |
| Appearance and Odor |
Translucent White to Slightly,Slight Odor |
SECTIONIV-FIRE AND EXPLOSION HAZARD DATA
Flash Point(Method used) >428oF(220oC)COC
Flammable Limits: N/A LES: N/E UEL:
N/E
Extinguishing Media:Carbon Dioxide,Dry Chemical,Foam
Special Fire Fighting Procedures:Self-contained respiratory
protection should be provided for fighting fires in confined areas.
Unusual Fire and Explonsion Hazards:None Known
SECTION V-REACTIVITY DATA
| Stability: |
Unstable |
|
| |
Stable:YES |
Conditions to Avoid:None Known |
| Incompatibility( materials to avoid ):
|
MayReact with strong oxidizing agents. |
| Hazardous Decomposition or Byproducts: |
Burning may produce carbon monoxide. |
| Hazardous |
May occur |
|
| Polymerization: |
Will not occur:YES |
Conditions to Avoid:None Known |
SECTION VI-HEALTH HAZARD DATA
| Route(s) of Entry: |
INHALATION? |
SKIN? YES |
INGESTION? YES |
Health Hazards (Acute and Chronic): No Evidence of adverse effect from available information on swallowing.SKIN ABSORBTION and INHALATION:May cause slight irritation in
contact with skin and eyes.
| Carcinogenicity: |
NTP? |
IARC MONOGRAPHS? |
OSHA REGULATIONS? |
| |
Not Listed |
Not Listed |
Not Listed |
| Sign and Symptoms of Exposure: |
Contact with Eye may result in slight irritation. Prolonged or repeated skin contact may cause mild irritation. |
| Medical Conditions Generally Aggravated by Exposure: |
N/E |
| Emergency and First Aid Procedures: |
SKIN: Remove by wiping and wash with soap and water.EYES: Wash with copious amounts of water. |
SECTION VII-PRECAUTIONS FOR SAFE HANDLING AND USE
| Steps to be Taken in Case Material is Released or Spilled: |
Spills should be absorbed or scraped up. |
| Waste Disposal Method: |
Use method outlined in local EPA and Governmental Regulation. Contact
your local EPA office. |
| Precautions to be Taken in Handling and Storage: |
Good manufacturing practices should be followed in handling and
storage. |
| Other Precautions : |
Surface subject to spills with this product can become slippery. |
SECTION VIII-CONTROL MEASURES
| Respiratory Protection (Specify Type): |
None Required |
| Ventilation |
Local Exhaust: N/A |
Special: N/A |
| |
Mechanical (General) N/A |
Other: N/A |
| Protective Gloves: |
None under Normal Use |
Eve Protection: None under Normal Use |
Other Protective Clothing
or Equipment: |
None under Normal Use |
| Work Hygienic Practices: |
Normal Precautions common to good manufacturing practices
should be followed. |
HMIS CODES
| FIRE: |
1 |
| HEALTH: |
0 |
| REALTH: |
0 |
| OTHER: |
0 |
|
|
